Quote:
Originally Posted by kach22i
Looks like it came out nice.
From the extra spars and the fact you were able to cold bend it, I'm assuming you used the thinner thickness 1/8" polycarbonate, right?
Would you even dare try your radius of cold bend in the 3/16" thickness?
|
We did use 1/8 polycarbonate on both Camaros.
The older Camaro has a flimsy hinged rear window like a 944.
Since the flat poly piece wants to flaten out we added a dzus fastener on each side to keep it tucked in.
I would not want to use 3/16 on this set up.
The newer Camaro has 1/8 polycarobonate as well.
But that window in fixed where the entire rear body section is removed with the rear window.
The 1/8 thick worked perfect with no side stiffeners needed.
I suppose on this fixed rear window you could try 3/16 but the 1/8 does a fine job in the back.
We used 1/4 polycarbonate for the windshield.