|
I have a bore gauge and it's no easy task to use ESPECIALLY at 1/1000ths. Have you thought about trying plastigage to verify. It's simple enough to install the bearings and crank, then torque it down. I'd put a bit of green plastigage every 90° on each main. It'll also give you a chance to check for burrs/crumbs.
Then, take your findings to the machinist and see if he agrees and develop a course of action.
__________________
72 911T 2.4 MFI
2017 Escape SE 2.0 turbo
2020 Honda Civic Touring Sport 1.6 turbo
10' Madone 5.2/17' Lynskey ProCross
|