Today, for some reason, I started taking apart the Targa inner pieces to get ready to install new foam and vinyl. Removal of the old vinyl and foam was easy by hand taking less than an hour.
Most of the grey foam came off in large sections...mostly it was just glued around the edges.
It was rather easy to remove the grey foam residue by rubbing with my fingers and thumb (and scraping lightly with my fingernails a few times):
There are a few places where I need to reglue the shaped foam back to the metal and a couple of small places I need to fill the foam:
Now I need to remove the old glue residue with some citristrip:
