Thanks guys! Today I started in on the foam and vinyl installation of the targa bar pieces. I got headliner material from Joann's for half price at $14.99 for two yards (because I might also do RS Door panels). This is 1/8" thick grey foam with a black material backing on one side. It is stretchy and strong....perfect. I also used a very strong headliner adhesive to glue it down.
I finished cleaning the boomerangs (by hand with finger abrasion; no solvents) and repairing one with contact cement:
I cleaned the removable targa liner with citristrip in the metal surfaces and by rubbing with my fingers on the foam side:
I am not reinstalling the dome light (useless), so I patched it with some left over sound deadening foam:
Then I glued the inside flat first:
Lastly, I trimmed it all around:
