Quote:
Originally Posted by aschen
Im not 1005 sure what you are asking. IT sounds like you are pushing on the cone and looking for some mv signal on the crossover inputs?
It dosnt sound weird to me to see 0 mv in this case. The crossover is filter network and its response will depend on how it is implemented and constructed. For example the inductor looks like a short at low frequencies and will have no voltage across it for low freq disturbances. Or that cap may act as a simple in series "bass blocker" and will not let any Voltage through until the frequency is near its cut of fpoint.
|
This is good to know, thank you.