Are you certain it reads open? Be sure the meter is set correctly. I've never had one dead out of the box. Try a different ohm meter if you can. At room temp it should read about 2,000 to 3,000 ohms.
Quote:
Originally Posted by 198491132
Thanks All, finally getting back to this effort. Got a 14m slotted socket, went to instal the new sensor. Tighten up and tested before fishing the wires up through the engine compartment. Tested open! Bad out of the box. Working on replacement now with our host.
Are these sensors that easily damaged? Only got 50k from the last one and now this failure.
Dave
|