[LEAKYSEALS951]

I'll share one from the vaults of my stupidity.
I put some pants in the washing machine.
I did not take some sheet metal screws out of the pockets of said pants.
The sheet metal screws got caught in the spinning part of the bottom, and the sharp edges cut through the non spinning plastic of the tub.
Water drenched the floor.
This was a NEW washing machine.
I researched the hell out of it- and the tub was some un-fixable/un-bondable plastic.

So I used a soldering iron and melted the tub back together- like welding.

It's worked like a champ for 3 plus years now.