Quote:
Originally Posted by rnln
Thanks look171,
So SDS max or Spline can take SDS and SDS plus bits?
Bill, If I need to get the bit that is made by the same drill manufacture, then I would just get home depot stuff, because I don't like the hassle. If most bit can go in most drill, let say Hilti or Bosch, then I would consider it. I like to be able to stop by home depot and grab some bits when I need them.
Thanks.
|
SDS plus will only fit SDS hammers and same for SDS Max. They are different shank size. Those bits can be purchased anywhere including Home Depot. It sound like you need a small roto-hammer with a selector for chipping. Don't hole your breath on the chipping with it. It will be just a little slower then watching paint dry, but will work.
Get a mid size Hitachi or Makita. They are usually a few bucks cheaper then the Bosch or Hilti. Those bits mentioned above will for all those hammers, you just need to decide on the size and shank style. I say the SDS Max because you will always have the option for a larger drill bit, but its heavier and bulkier.