[jvandyke]

So we were dinking around with it, scoping out the flywheel and oil pan and bores and I grabbed the breaker bar on the crank and my son watched the flywheel. It moved a fraction, back and forth about 6 times and bam, she was free!
So it's not siezed anymore, spun around many times and no drama.
Starting getting ready to light her off, fresh oil, spent a LONG time trying to clear the ATF/acetone out of the bores. Had to try and fire it off; pops and wants to go but didn't quite do it and didn't sound all that great trying to so prudence won out and we called it an evening.
Gotta figure out a good way to clear the bores out. Hand pump didn't want to grab anything, resorted to soaking up as much as I could with paper towels poked into bores and spinning it over plugless. I kinda thought that might not be a bad thing; running the pistons up and down a bit in the ATF and acetone/PB Blaster cocktail. But now they need to be clean.