Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > 911 / 930 Turbo & Super Charging Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
Join Date: Nov 2016
Location: Denmark
Posts: 29
Garage
Wiring diagram / fuse overview

Anyone that can help me with either a place to get an wiring diagram for a 930 year 1980 in a read-able quality ?
Would like a fuse overview also, since the one in the car doesn't fit with the the fusebox cover.
The car had a small short circuit behind the oil temp gauge, causing the red/black wire to melt and also a piece of the brown ground wire between two terminals is melted.
I have removed the harness and replaced the R/B wire from one end to the other, and installed the harness as per pictures from before removal. But now I can't get the interior lights to work, I must have missed something
If I check the wiring @ one of the lights, there is connection from black wire to ground. Is that caused by signal through the bulb ?

F4 seems to be wrongly wired, huge square on the up-side, yellow fuse, two small wires on the low-side, where the green/red seems to be misplaced and the black wires should feed the interior light ?



Old 04-30-2022, 02:07 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 5,280
Garage
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 04-30-2022, 07:39 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Registered
 
Join Date: Nov 2016
Location: Denmark
Posts: 29
Garage
Thanx a lot, just what a needed
Old 05-01-2022, 07:57 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered
 
T77911S's Avatar
 
Join Date: Oct 2006
Location: MYR S.C.
Posts: 17,334
is the problem with F4 because of the large gauge wire?
if you notice those fuse terminals are tied together with a flat metal tab.
the large 6.0(?) wire should be from battery,

porsche wiring let much to be desired. their lack/design of wire protection with fuses was not good.

i removed each wire from the terminal block and cleaned the wire ends along with the screw to make the connection better.
also clean the fuse contacts and fuse holder contacts.
resistance causes heat.
__________________
86 930 94kmiles [__] RUNNING:[__] NOT RUNNING: ____77 911S widebody: SOLD
88 BMW 325is 200K+ SOLD
03 BMW 330CI 220K:: [__] RUNNING: [__] NOT RUNNING:
01 suburban 330K:: [__] RUNNING: [__] NOT RUNNING:
RACE CAR:: sold
Old 05-02-2022, 07:03 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Registered
 
Join Date: Nov 2016
Location: Denmark
Posts: 29
Garage
I've found the issue, the black wire for interior light was not seated correctly

Now I'm chasing what causes the charge light (don't know the correct naming) to turn on
Need to measure the voltage to figure out what is causing it.
Worked perfectly before the short circuit
Old 05-02-2022, 08:54 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Registered
 
908/930's Avatar
 
Join Date: May 2012
Location: BC, Canada
Posts: 2,225
Garage
While you are at it, did you add a fuse behind the ignition switch for I think it is the dash and glove box light? There are a couple other items that are not protected correctly, do a quick search.

Not the best electrical system.
__________________
87 930,
Old 05-02-2022, 09:11 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
Registered
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 5,280
Garage
Quote:
Originally Posted by Ckragh View Post
I've found the issue, the black wire for interior light was not seated correctly

Now I'm chasing what causes the charge light (don't know the correct naming) to turn on
Need to measure the voltage to figure out what is causing it.
Worked perfectly before the short circuit
Check your charging voltage at battery - engine running. Should be 14+. If not - alternator or VR faulty.
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 05-02-2022, 11:39 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)
Registered
 
T77911S's Avatar
 
Join Date: Oct 2006
Location: MYR S.C.
Posts: 17,334
if the bulb does not light with engine off and key on either the bulb is bad or the wiring is messed up.
either case the alt will not charge the batt.
__________________
86 930 94kmiles [__] RUNNING:[__] NOT RUNNING: ____77 911S widebody: SOLD
88 BMW 325is 200K+ SOLD
03 BMW 330CI 220K:: [__] RUNNING: [__] NOT RUNNING:
01 suburban 330K:: [__] RUNNING: [__] NOT RUNNING:
RACE CAR:: sold
Old 05-04-2022, 08:38 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)
Registered
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 5,280
Garage
I think there is a diode under the dash somewhere that is hooked in to the charge circuit?
Been a common fault I think.
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 05-04-2022, 03:48 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)
Registered
 
Join Date: May 2019
Posts: 167
Go to prospero's Garage, colorwiringdiagrams.com, you ought to find exactly what you want.
Old 05-04-2022, 06:23 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #10 (permalink)
Registered
 
Bucketlist's Avatar
 
Join Date: Mar 2014
Location: Lubbock, Texas
Posts: 1,429
Garage
Quote:
Originally Posted by Coblue View Post
Go to prospero's Garage, https://colorwiringdiagrams.com/, you ought to find exactly what you want.
These look pretty cool.....something else to hang on the wall.
11x17 2 page laminated wiring diagram by year model for about $25 shipped.
I think I'll order one.

__________________
Steve
1981 SC Steel Widebody Outlaw in Pacific Blue and Artic White, 930/51 to 3.2l, K27 7006 Turbo, P&P Twin Plug heads, Twinfire Ignition, BLwur, Ruf Intercooler, Powerhaus headers, Zork, CIS Euro FD, 009 injectors, DOD, DP Lid, 044 pump, 930 4 sp LSD, Mocal 44 w/fan, LM2, Brembo, Retroair, Euromeisters.
Old 05-05-2022, 03:35 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #11 (permalink)
Reply


 


All times are GMT -8. The time now is 06:30 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.