How do I get large oil line to motor nut (down by the return and pressure pumps) off!

[H.G.P.]

If I try to turn the large nut the entire line moves but not the nut. (Cannot find anything in either of Wayne's book on this) Motor is a 69 E.

Help, Thanks!

[Jim Richards]

There's an adapter that's between the oil line fitting and the engine case. You'll need to hold it with a thin 32mm wrench as you lossen the oil line.

[H.G.P.]

Originally posted by Jim Richards
There's an adapter that's between the oil line fitting and the engine case. You'll need to hold it with a thin 32mm wrench as you lossen the oil line.

Thanks Jim. I'll go find a thin one.