|
Registered
Join Date: Jan 2007
Location: Camano Island WA
Posts: 695
|
There is a procedure on this forum to install a button start. I used it a few years ago to install one in the front and one in the rear by the fuse panels. I was in the process of a complete re-build (3.2) and was having no start difficulty. I used them to activate the starter from a position that allowed me to see what was going on in the engine compartment or the front bonnet. The process uses a simple relay and lays out the specs for wiring. I added a simple toggle switch for the hot wire at each button switch to eliminate fire hazard. Search this blog and you'll find it. Hope this helps, worked great for me. Larry
__________________
2006 Camry
1964 356 Cab
some 911 Porsches
|