Quote:
Originally Posted by Jonny H
Ryan,
I'd just put the tacho connections back to how it was originally in the diagram I posted. I can't see any advantage in using the MSD tach output to drive the tacho.
|
Hey Jonny. There are no connections from the MSD except power to the dizzy. The purple and black wires I talk of above were like that originally however, the original black from the dizzy would have gone to the transducer according to the diagram. This is not needed now due to the MSD. if I go by the diagram I should just bypass the transducer and connect the black and purple from the tacho end, to the black and purple at the dizzy end, at the Bosch can. This would create a flow that bypasses the transducer. Can you see a problem bypassing the transducer?