|
Registered
Join Date: Dec 2002
Location: Dahlonega , Georgia
Posts: 15,220
|
I removed one of the screws and started removing the second one when I decided to see if this was really going to come apart when I removed the second screw.......it does not ! It looks like the two screws hold the guts into the can during manufacturing then the glass lense bezel is crimped in place. So it does not come apart. I hooked it up to 12 volts and it works so I went ahead and installed it in the tractor. I don't want to over analyze this one it's done .
__________________
2002 Boxster S . Arctic silver + black top/int. Jake Raby 3.6 SS engine " the beast ". GT3 front bumper, GT3 side skirts and GT3 TEK rear diffuser. 1999 996 C4 coupe black/grey with FSI 3.8 engine . Rear diffuser , front spoiler lip with ducktail spoiler .
|