Quote:
Originally posted by MuffinMan
Bill,
What kind of lines are you running to the cooler?
Rob
|
I now make 30mm Widemouth fittings that screw right into the Setrab coolers. These fittings allow you to use Porsche factory type 30mm hose ends and hose throughout.
You won't need AN->metric adapters. And you won't have any restrictive AN-12 fittings in the system so flow is improved.
And to answer your original question, a Setrab std172 would be a good single cooler choice for your 3.6. Combine that with the 30mm fittings and you have a clean, easily plumbed solution for the conversion.
Notching the front pan and using an RS type vent panel to give the cooler air flow a good escape route is highly recommended.