[Bukowski]

Recently got my oil analyzed by a popular internet-mail-in service. Might have been 3000 mi or closer to 1000 mi, not sure. Castrol GTX 10W-30. Oil-coolant sludge and new cooler seals over 10 years ago. I was inspired by van Svenson using analysis to decide on changing the rod bearings. My total engine mileage is not reliable. Enjoy:

Oil analysis 1:
PPM's:
Al 3
Cr 0
Fe 4
Cu 2
Pb 0
Sn 0
Mo 17
Ni 0
Mn 0
Ag 0
Ti 0
K 2
B 66
Si 4
Na 61
Ca 2143
Mg 8
P 703
Zn 824
Ba 0
SUS Viscosity at 210degF 57.8
cSt viscosity at 100degC 9.58
Flashpoint (F) 395
Fuel (%) <0.5
Antifreeze (%) 0
Water (%) 0
Insolubles (%) 0.3