Quote:
Originally Posted by Ed_914
I cleaned the stud with a dremel to bare clean metal. Then I put a big washer over it ,with the perfect size hole and then I did put a big nut M12 over it. Protect your case with fire resistant cloth and mig weld the nut on. Because of the gap between the stud and the nut you get a good and deep weld. The heat will help loosen the stud. This is how I did several of mine.
|
Thanks, I will try welding a nut on, or use a dremel to cut a slot for a screwdriver.
Did you have any issues welding a nut onto the stud?
Tom