|
Member 911 Anonymous
Join Date: Sep 2007
Location: Rancho Palos Verdes
Posts: 14,329
|
Well, before you tried to adjust it was still aligned, but now it is out of alignment due to the slop in the bushing. Replace both the shaft and ball bushings.
Just did this job with an 86. Make sure ball cap bushing is on the shifter end before putting it back together then re-adjust the coupler.
__________________
'85 Carrera Targa
Factory Marble Grey/Black * Turbo Tail * 930 Steering Wheel* Sport Seats * 17" Fuchs (r) * 3.4 * 964 Cams * 915 * LSD * Factory SS * Turbo Tie Rods * Bilsteins * Euro Pre-Muff * SW Chip on 4K DME * NGK * Sienes GSK * Targa Body Brace
PCA/POC
|