|
I just received my Booster Plug, thanks Jen. Fast, prompt service.
The instructions weren't right for the R12S but it wasn't a problem.
Remove both side fairings, remove the 2 bolts holding the tank on, lift the tank about 3".
Unplug the current AIT connection, install the BP, route the sensor to the front of the bike and put it back together.
I don't have time to test it today but it started easier, the idle was smoother and the throttle felt better. Hope to have some time this weekend to put about 50 miles on it and see.
I'll post here when I've had a chance to ride it.
|