Quote:
Originally Posted by TurboKraft
Hi Pat, yes that is the part number for the ethanol content sensor.
ID1700 = incredible injectors
Never used the Okada products, but as long as they don't give off a lot of noise then you should be fine. 6x / 12x coil-on-plug is no problem.
You are always welcome to email us, we'll give you a list of the parts you'll need to do the job correctly and completely the first time.
We may be able to help you with the tuning and configuration as well, ex: use TeamViewer to remote access your PC when tuning.
|
Thank you Chris,
We already contacted and you had even drawn a picture for me !
I did not handle the combustion chamber with it céramic to avoid the strong corrosion of the ethanol, I should rather turn on ID1300 to have the choice of the fuel ( SP98 / E85), my engine is already closed.In the next opening I shall make certainly the ceramic treatment(processing) and at the same time I shall pass of 3.456L in 3.6L. I also hesitate between the serial AEM 2 and the AEM infinity 6, in brief I shall contact you certainly by email, thank you again.
Pat