|
Registered
Join Date: Sep 2001
Location: Dismal Nitch, AZ
Posts: 9,042
|
I downloaded some grids...printed out and am using them.
Just had to figure out 1/3 of a half inch. Somewhere around 1/6".
What I've seen online is that 1/3 of the diameter of the turning tool looks best.
.
.
Here's my practice aluminum piece...my final piece will be on the flip side...it's mirror polished.
Two different diameter turning tools. The 1/2" one is leather glued to a dowel and a hybrid of valve lapping compound and rubbing compound.
.
__________________
Don
.
"Fully integrated people, in their transparency, tend to not be subject to mechanisms of defense, disguise, deceit, and fraudulence."
- - Don R. 1994, an excerpt from My Ass From a Hole in the Ground - A Comparative View
|