[T77911S]

i just did all 4 of mine,

just pull the shafts out, its not that big a deal.
I remove the wheels and use a LONG extension for the inner ones.

when putting back on, put the outer side on first.

take note of the CV joint.
the groove goes to the outside
the "step" on the inner flange goes to the center of the axle
the big side of the cage goes to the outside. (I did not notice on mine)

get the KN boot from here. it has a groove on the big end that fits onto the flange
you can get a set of the clamp crimp pliers from advance for $10
I did not put a clamp on the inside (small end) of the boot.

I used swepco 101. I liked it because it was kind of sticky
one tube will do 4.