|
I apologize if my frustration comes through here, I really am puzzled by this and I could use your assistance.
I have agreement that the connectors should conduct electricity (that's what I mean when I use the term continuity) but my tester shows that none of the older spares I have nor any of the brand new connectors just acquired have continuity from end to end. The plug wires do, the connectors do not. As mentioned before, the connectors do measure a resistance value from end to end...just less than 1,000 ohms...which means to me there should be continuity.
So...when I crank the engine checking for spark, there is none. I have an old and a new coil, I have a "spark" when the points open at a couple degrees before TDC, but the spark plugs won't react.
I am hoping someone could check a spare connector laying around for continuity or offer a suggection as to what to try next. Thanks a million. Dave
|