|
I found a nice set of 924 phone dial wheels, 15x6, +52mm offset. Haven't pulled the trigger on them yet because I want to know what it would take to convert the stock 4-lug to 5-lug to mount these wheels, and if these wheels will work. From reading this thread and the technical article, seems that the easiest and least expensive way is to just get the stock rotors/hubs drilled to take 5x130 studs (14x1.5mm?). Understood whenever new rotors are needed they'll have to be drilled again with new studs, but at the rate I'd drive this car, that could take 10 years! Are 14x1.5mm wheel studs fairly common, or in the realm of unobtainium like other things for 914s?
|