|
Registered
Join Date: Mar 2003
Location: Darnestown, Maryland
Posts: 914
|
I made mine with a piece of the tin c-clamp that holds the joints of heating duct together. It's about 1" wide. I couldn't bend it to exactly the shape of the pictures but it worked great. Once the case was together I took my tin snips and cut them up. In the can they went.
I used this because it was there. I'm sure you can get it at any home center for a few bucks. I think I used about 4-6 feet. (At the most.)
__________________
Bill Miller
81 Targa Guards Red
3.6, M&K 1 out, S4 brakes
83 ROW CAB Rubinrot Metallic (RIP)
|