[Tom '74 911]

Nice write-up 962porsche!

Here's some little pieces I made up to fill in some holes in the floor pan & rear seat back area from a previous owner's roll bar I think. The holes were a little too big to fill in w/a MIG, although I probably could've made that method work too. I'm not a pro/for profit shop, so I don't always chose the fastest method, but usually the one I'd either like to experiment with or that I'm most comfortable with.

Kind of tedious to cut out a bunch of pretty small circles, weld a short piece of TIG rod onto each one so I could hold them while MIGing them into place. I didn't take finished pics yet...