|
Registered
Join Date: Aug 2003
Location: Castro Valley 94546
Posts: 6,469
|
upgrade from 1.7L to 1.8L flycut ?
all;
i'm changing out the heads on a type 4 (dropped seat). as it turns out 2 of the pistons are pretty beat up as well. i have a set of 1.8L P&C (also low compression). is there machining required in order to use these w/ the 1.7L heads ? (022.101.372)
TIA
is this a great board or what ??!! ;-)
cheers
jerry
|