[Trackrash]

Can a similar test be performed on the 6 pin CDI?

Originally Posted by Early_S_Man

This is the board layout/picture for the 1972 CDI unit ... it corresponds to the fig. 17 layout in the test document:



Here is the early schematic for 1969 - 1972 CDI units ... Please note that the test point labels in the test document do NOT correctly correspond to all of the labels in this version of the schematic [TP #1 and TP#2 are OK for scope tests, but to short main capacitor -- TP#4 & TP#4a are used ] ... based on an estimated 1974/75 revision:



Here is an annotated picture/layout for an early 1972 CDI unit corresponding to fig. 16 in the test document.



Here is the revised parts list showing R4 and 33 Ohm 5 Watt version of R3: