[thekidd]

I've been having some troubles with my ignition system. It all started when the 50 wire in my ignition switch fried from the switch to the fuse box. Before I replaced the wire, I was getting nothing from the starter. After I put the new wire in, she started, and when I shut her off, the starter kept on continuing to rotate. Replaced the starter with the one from my 84, and same thing. Starter keeps spinning until I take the battery connections off. I replaced the ignition switch, and same thing. I am getting 0 volts on the small/red wire at the starter when ignition off, and 12 with the car running. 12 volts on the thick wire that comes from the alternator running and not running. I even hit the starter after I turned her off while the starter was cranking. All wires seem to be in good order, where else should I look?