|
Registered
Join Date: Mar 2008
Location: Fla panhandle / Roaming in my motorhome
Posts: 4,332
|
This contact between the trans and the crossmember started right after replacing the mounts. The mounts seem simetrical so I don't see them being in backwards. I'll pull them off to see if there is any other way to bolt them in, that would affect the position of the engine.
I'm going to have a close look at the crossmember and it connections to the tub, to see if there are any signs of movement there. The clearance does not have to be big, just enough to keep them apart.
I took the oil cooler to a radiator shop that has done some good work for me. They said they would have to fab a plate to be able to test to the 75 psi . This will probably cost close to the test piece shown here earlier. So I may look into finding one of those test pieces for myself.
Cheers Richaed
Last edited by tevake; 12-06-2016 at 08:05 AM..
|