[QUOTE]Originally posted by Walker944:
Hi Walker go to the brake fluid resivour and care fully remove the wires , the pins that the wires are connected to might come out of the top if so they can be slid back in.
See if your float is still on the pushrod and that it is not filled with brake fluid, also make shure that the level is between the max and min .. dont add a whole lot of fluid if the brakes are worn as the fluid will come out of the top when you replace the pads, also loo for a leak in the clutch master cyl and slave , clean the cap N float and put it back on the resivour...Stan
|