Quote:
Originally Posted by Dan J
I'm a little confused. Did Damon say that the tube was bent or not?
I know he is very particular on his measurements so if the trailing arm mounts are in the
correct spot then it must be bent control arms
|
This is what I came here to say. If the chassis sits on the Celette as it should and is deemed 'straight', and you still have non-symmetrical alignment settings or can't achieve the toe or camber settings that you should be able to, I'd start looking at bolt-on parts (control arms, spring plates, a-arms, struts etc...) very carefully to see if something else is bent.