[Beirut944]

Update:
I have found the lever underneath the driver's side which was disconnected. But after moving it, i have discovered that this is just the flap to direct the air above or below. I couldn't find the second one which actually regulates the hot air (i suppose)

Also, after feeling the water pipe by the heater valve i noticed that it was only warm to touch. I'm wondering whether the heater valve is faulty, although fro what i read on Clarkes, when they are faulty they usually stick open (hot). Both the vacuum lines are attached. One goes to the emissions control valve near the fuse box and the second goes to the front of the manifold near the air intake rubber hose.

Any advice appreciated. It's getting cold here.

Oh, one other thing. Is it possible that my engine simply isnt getting hot ENOUGH for any heat to come through? It only manages to get above the FIRST marking, which i am told is not normal as it should be at least on the one third level.

thanks


MJ