Quote:
Originally Posted by cavski
Hi Nick, if you needed to fill up the fluid reservoir then you have a leak, no doubt one or both of your rams (hydraulic pistons) that push the roof up and down. They operate via a small electric motor. To check the rams you need to take off the rear side panel which will expose the rams, they should be dry.
Is the motor working ? You should hear it when you press the roof button, if not I'd try there.
Hope this helps
Pete.
Sent from my iPhone using Tapatalk
|
Hi Pete, thanks for the info. Right now I don't see a leak. Maybe it's just been 18 years of a little bit of fluid gone, here & there. Right now the reservoir is full... so
the top should work. Over the next few days I'll look for any leaks.
One thing I just thought of is, I haven't re-instlled the rear clamshell (top) cover.
That may need to be installed, then in it's down position maybe it trips micro switch to tell the system that the clamshell is locked down. Then it can do the next step (top going up). Uggghhhh