|
1. Red positive "fuse" in the bottom of the fuse panel pull it out a little to enable positive jumper connection. Door lock loop on the body for negative jumper connection.
2. Engine release cable coiled between left rear tail light and bumper. Gently slide a rubber spatula into the space and use a stiff wire hook, picture hanger wire, to pull the engine cover release wire out. Use the + terminal and the air box mount bolt to connect the jumpers.
3. Frunk release cable runs under bumper cover to in front of right front wheel well cover. Fish it out and gain access to the battery. Some times you can get it by sliding under the front and looking for it, or pulling the side marker light and fishing around for it.
__________________
2013 991.1 Carrera S Cab
2004 996 Turbo CAB X50 sold
2003 996 cab 6 speed Sold
1972 RS 3.2 twin plug short stroke crank fire, roll bar, sold
DE instructor since 1985
|