So with my new clutch MC, slave, and hose installed, I went about bleeding the system using this method:
https://www.youtube.com/watch?v=wdf--suwqw0
bleeding up from the slave using the oil can pump. The brake fluid filled the slave and MC (I assume) because the reservoir filled up as well. I started with the reservoir partially full. Now, when I push on the clutch pedal, the pedal doesn't return, it stays down. I guess I don't understand what causes the pedal to come back up. Does this mean there is still air in the system? Or does the MC rod need its length adjusted? I set the length so it was the same as the old one I removed. Thanks.