Well is was brought to my attention I had mixed up some prices.
The RSR Inj pump was listed at 25K its actually 30K
The slides were listed at 30K, they should have been priced at 25K
Sorry about this. Alain
Well the Dick Elverude RSR engine came apart and all is for sale, many of the proven Dick Elverude tricks and development work from back in the day. The engine case is sold as was the crank and rods, but the buyer of the crank has decided to build a much larger lower end with a different crank and rod length so I bought it back.
See the video of it running before it came apart Link
https://www.youtube.com/watch?v=lIxZ8Pq4OXk&feature=youtu.be
Here is another link to the thread that has more information along with pics.
F/S RSR Flat Fan Slide Valve engine
Bosch ORIGINAL 3.0 RSR Injection pump for slide valve (can be used for high butterfly
25K)[/I]
30K
[/B]
Factory original very low time slide valve set up with risers (that are part of the development work) that made gains in HP and pulled harder on the top end. included are factory fuel lines and injectors. (
30K)
25K
Forged solid factory race rockers and shafts 3,000.00
Sold (but have a couple of more sets).
Mahle 100 mm barrels and J&E 100 mm Pistons with wrist pins- Both were new 6 hrs ago
3.3 perfect oil pump
6 twin plug heads with Ti valves and aase springs. Lots of Port and flow work 3,000.00
Elverude Twin plug dist only,
cap and rotor/harness are not included. 1,500
Elgin billet center oiler cams built to Elverude specs (more development work) 2,000.00
Sold
Chain boxes
200.00 Sold
Plus what ever else on the lower end you need. Make me an offer!
Thanks, Alain. for technical info and additional pics contact pops directly at
jim@torres.com