Update: All pistons in Cylinders, ready to mate to case and place heads & Cam tower. After deck height check of course.
Tool Review: WISECO RCS09800 true 98MM Tapered Spring Compressor is the BOMB! No hammering, slips right on once you position the spring correctly, with the gap side in first it compress right in then remaining rings just follow suit. On my list of my favorite tools to use. :-)
Also the 964 Wrist Pin Tool modified:
You have to cut this very expensive tool 1/4" on both side tabs to make it work for the 3.2 & 3.4 Pistons, you learn how to use it when you put on the wrist pins on one side first, WORKS GREAT. I believe the Stomski works about the same way but with a much thinner holder. I like the Porsche tool because it does not allow the clip to fall into the engine if you miss-align it.