|
What did you determine as the correct length, was it 40mm or 45mm? I just installed my KEP pressure plate to my SC flywheel. And I used new 45mm allen head bolts, but I feel like they bottomed out. I measured the width and things seemed to be OK, but upon tightening them down, they seem to just stop, which makes me feel they are bottoming out!
I measured the thickness of the KEP pressure plate with starting ring gear attached at 30mm, which leaves 15mm for flywheel thickness, is that too much?
__________________
1971 911T (Tangerine)
1973 911T (Light Yellow)
1978 911SC -- "Northy" 3.2 twin plug
1990 911 Carrera 2
|