|
Registered
Join Date: Nov 2009
Location: Rancho Cucamonga
Posts: 666
|
I run my stock T-bars in the back AND coilovers. The majority of the weight is on the bars and ride height is set mostly with the bars.
The coilovers consist of three springs. Top is 150# Eibach that acts as a bumpstop/anti-roll. Middle is an 80# from D Falkner. Bottom is a 4# helper. The 80# spring is what gives my stock bars an effective rate of 29mm. They are squished down to within a half inch of fully compressed.
I used Juan at Bilstein Poway for all the valving and grooves
Just raised my spindles 26mm and added 1° of neg camber and a second steering arm. Sick!
|