|
Registered
Join Date: Oct 2005
Location: Capistrano Beach, Ca.
Posts: 7,235
|
First, be sure all the air has been bled from the MC switch before inserting. IIRC, your 912 has a mechanical brake light switch attached to the brake pedal, behind the floor board. If so, run a test to see if that switch is operating correctly. It's been a long time since I had an early car but check for the mechanical switch on the pedal cluster. It should have power on one side and none on the other.
__________________
L.J.
Recovering Porsche-holic
Gave up trying to stay clean
Stabilized on a Pelican I.V. drip
Last edited by ossiblue; 06-11-2017 at 08:37 AM..
|