|
hallo Chris
I try , the black insert goes into the Cup first . than there is a plastic seal that goes between the Cup and the socket .there is a little screw going trough the seal into the Cup. Now you stick the locker trough the socket into the Cup like in the Picture . The locker goes trough the socket and trough the Cup and needs to go into the black insert. It takes a lot of force to compress the Spring and rotate it a half Turn .
Youneed a 12 mm Inbus to turn it .
I usually put the Inbus in a bigger Vise ,put the Spring on the Inbus ,stand on the Workbench and push the cup down into the Spring.
It looks a little funny but i found it the easiest Way.
For better understanding put the locker into the Cup without the Spring and you will see what i mean .
Sorry for the bad language but i hope it helps .
Harald
|