Quote:
Originally Posted by scarceller
You certainly are free to try using the 715s but they will run lean at very low pulse widths because they need about 2X the offset (on time) than the original injectors. You may be able to hit the mixture setting at idle by adjusting the CO screw on the AFM but then you'll run rich at the higher loads.
|
You might also consider using Siemens injectors that are described as having:
"Excellent response characteristics
Robust Design
High Impedance
Low Impedance performance characteristics with High Impedance Compatibility "
60lb/h Siemens Deka High Impedance (Long Style) with EV1 Connector – FI114961 (60mm) | Muscle Motors | Siemens Deka Distributor
http://www.siemensdeka.com/wp-content/uploads/2012/08/FI114961-2.jpg
Cheers,
Joe