|
Registered
Join Date: Jul 2013
Location: Brisbane, Australia.
Posts: 2,713
|
Interesting:
When I used the tool for the 23mm in my 964 I had the same problem. What I was doing wrong, was pushing the clip too far inside the tool.. I was so doubtful, that removed all circlips and bought new, and did it again.
Turns out, then you have to only push the clip in JUST ENOUGH to stop it springing out.. if you push it all the way into the tool, then you will ruin the circlip.
On the 23mm, there is no way I could do the job without the tool.
The Stomski tool is great, but needs a bit of practice.
|