Quote:
Originally Posted by Great_Escape
I may be reading this wrong. Hubs off of the rotors or hubs and rotors 1 piece just off the spindle?
You need to turn the rotors while they are bolted to the hub. The machine uses the bearing races in the hub to center itself in the lathe to make a cut perpendicular the bearing races. It is also possible that even a brand new rotor will slightly warp when torquing it to the hub. I've always put a finish cut on new rotors after assembly just to be safe.
|
Maybe that's the problem? I took these in just like I would any other set of rotors, rotor only. Thanks for the input.