|
Paul,
Interesting on the WD40. I've never tried that but a nice thing to know. I also like some of your tips on laying down paper - a good idea because once you start you will realize you are making a mess of globs of gooey adhesive and it's nice to just roll up newspaper vs trying to pick this up off the drive. Ditto the old rags to wipe the scraper. You will go through a quarter roll of paper towels as there is simply no other way to clean the scraper on each scrape.
Be cautious about rubber wheels and the like. As pointed out there is potential for heat or friction damage. I suggested the 3M Adhesive Remover because it was formulated to work very well but avoid harm to paint. Don't forget to first clean those edges where grit is embedded in the old glue. You will need to press fairly hard and that grit will scratch the paint unless you take the time to first remove it so the plastic is not carrying grit across your work surface.
__________________
84 944, 87 Vanagon, 88 Mitsubishi Van Wagon, 88 Supra Targa, 1990 Audi 90 20V Quattro sedan, 1992 Lexus LS400, 1993 LandCruiser, 1997 LandCruiser, 2017 Subaru Outback.
|