View Single Post
smurfbus smurfbus is offline
Turbofrog
 
smurfbus's Avatar
 
Join Date: Aug 2009
Location: Europe
Posts: 1,677
Pancake manifold might be a bit troublesome too but Id like to keep it. Its bored to 38mm. Trimming the injectors per cyl might be on the cards later too.

Light throttle cruise is most unsteady as its very gear dependant. Lower gears might be spot on but highway goes very lean. I still have 58 lowest vacuum on overrun and idle hoovers around 64-66 with 800rpm and now 12btdc. it was about the same with 6btdc but I feel I had more fluctuation with that low idle timing as it raises sharply for good low rpm cruise on lower gears.
__________________
************************************************** *******************************
10/78 930: HX40Super, MS3pro+IDX1050+044+E85, ITB, 12 Denso COPs, TrueSplit-BB/2*38WGs, Weight<1100kg
Old 08-29-2017, 02:21 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #362 (permalink)