Quote:
Originally Posted by philip j
John, I'm running the same injectors at 43 PSI, I'm about 90% duty cycle at 1 bar. I'd like the ID 1000's but they are a little pricy! The EBC sounds like a good feature, I could really use that as my car gets squirrely in 1st and 2nd. ;-).
|
You have a lot more power, due to your mods. Heads and cams. You must be well over 500 ho. EBC would help to get power to the road.
MS3 Pro also has a traction control feature.
I still have to look into this.
With regards to the injectors you could try adjusting the injector timing to optimize when the injector sprays on the back of the valve.
It can help to reduce required injector duty cycle. I believe Tippy had touched on this.
You could also increase the FUel Pressure, to help with duty cycle.