[GotaT]

I have a Carbed 72 2.4T engine 5R case with reground T to E spec cams (DC05). The heads were resurfaced/shaved when the reground cams were installed and I am currently in the process of rebuilding the bottom end and replacing the Piston/Cylinders.

I'd like to know some best recommendations for more power without modifying the bottom end. So 2.7 is out of the question.

I've read somewhere about using 2.2 heads? with 2.4 piston/cyl for increased compression ??

Parts at my disposal for the build :

A mag 7R 2.4 CIS engine that I believe has usable heads and bottom end (Pist/cyl are bad)

Also have a long block 2.2T with bad (P/C's)