Hi all,
new to this forum, but not to these cars. Have had 1 924 and this is my 3rd 944.
This car is a 1985.5 944
Car would run and stall intermittent. Sometimes restart sometimes not. It sat for a week and now it won't restart.
When you crank engine over there is no movement of tachometer.
Battery is decent, charged it over night , has over 12 volt at rest, spins engine over good.
Had spare DME relay. Tried that no luck.
I made a DME relay bypass/jumper and did not start. Does this test bypass the DME itself, ruling it out as bad?
Measured resistance of speed and reference sensors. Getting 900 ohms between pins 8 and 27 on ref sensor, and 880 between pins 25 and 26 on speed sensor. Those seem within spec.
But between 8 and 23 on ref sensor and 25 to 78 on speed sensor I get nothing measurable. Is this normal or do they both seem bad?
Having trouble deciding if the DME or 1 or both sensors are bad. Any info appreciated,
thanks
